Features for all of DSX STRAIGHT THRU PASSAGE AIR SHOWERS
Standard construction is Corrosive Resistant Polypropylene, Epoxy
Painted Steel, 304 or 316L Stainless Steel units are also
Top loaded High Efficiency Particulate HEPA filter: 12” thick
V-Bank Hi-Flow minipleat design 99.99% efficient @ 0.3 micron in an
anodized aluminum frame, PSL tested in accordance with IEST
High Efficiency direct drive220/380V 3-Phase(Or 220V 1-Phase) motor
blowers. Motors/Blowers are selected based on customer voltage
Adjustable DSX air nozzles on walls and ceiling shall be white
plastic construction sized and spaced to provide an average of 6000
- 7,000 fpm air flow at the face of the nozzle.
Return air registers at floor level on walls shall be anodized
aluminum with 1” pleated MERV 7 prefilters.
Recessed 2 pin T-8 fluorescent lighting 60 ft. candle in interior
ceiling with prismatic refractive lens cover.
Anodized aluminum entry and exit doors with push/pull hardware,
hydraulic door closures and acrylic, polycarbonate or safety glass
A Programmable Logic Controller (PLC) shall be used to control the
sequence of operation of the Air Shower.
An Emergency Off button (EMO) shall be located inside and outside
of the Air Shower in a conspicuous location.
Activating the EMO switch shall cause the cycle to immediately end,
and release all interlocks. Lights shall remain on.
Door sensors shall be 24 volt DC magnetic reed switches. Door
interlocks shall be 24 volt, located in the doorjamb. All locks
shall automatically release upon loss of power or when the (EMO)
button is pressed.
The Air Shower shall be a high velocity, low pressure type system
in accordance with Federal Standard 209E .
Many options are available for this air shower( and other clean
room equimpment) such as a Constant purge option, raised floor or
sliding doors. Consult DSX trained experienced sales engineering
staff for more details.
Standar size and specificaton:
External dimensions (mm)
Dimensions in WxDxH(mm)
Material for case
Cold rolled steel with powder coated , SUS#201 or SUS#304
HEPA filter’s dimensions
610x610x50 One piece
610x610x69 two piece
610x610x69 two piece
Air shower time
Spurt wind speed
hepa Filter efficiency
Above 99.99% efficient on 0.3um particles
LCD control panel, electronic interlock and automatic blowing
As a Professional air shower manufacturers ,we also manufacture air
shower cleanroom，air shower tunnelair showers and pass thr ，air
shower blower，air shower cleanroom，air shower clean room，air shower
– clean room air shower，air shower booth。To know more about air
shower clean room design,air shower booth price,Consult our factory
trained experienced sales engineering staff for more details.